We are delighted to be working alongside the high-quality stove manufacturer, Woodwarm Stoves at this year’s Hearth & Home show in Harrogate between 9-11th June 2019.

Woodwarm Stoves has both quality and safety at the centre of their operational ethos. This is one of the reasons why they endorse and use Kemwell FPL Fireplace Lining Calcium Silicate Board as part of their stove installations when a new or replacement wall lining is required.

On the Woodwarm Stoves stand (B10) you will be able to see one of their stoves with Kemwell FPL used to help make the installation look beautiful as well as being safe, long-lasting and HETAS compliant.

They will also be showing their exciting new Ecodesign Ready Phoenix Range, from 4kW to 8kW.This contemporary range of stoves exceed the minimum requirements for 2022 and are all approved for smoke-controlled areas. These stunning stoves are individually built by craftsmen in the heart of Devon and retain all the fantastic features of the original Phoenix Range including stay cool handles, ease of lighting and amazing controllability aided by the extremely controllable secondary and tertiary air systems.

Included in the range and on show at Harrogate is the easy fit Phoenix Eco Firebright 5kW Inset stove and the new sleeker designed Phoenix Eco Firebug – now 8kW.

Also, at Hearth & Home this year is their thermostatically, fan assisted Gas Fired Phoenix Stoves, available in 3, 5 and 7kW. Fully remote controlled, electronic ignition and stunning real flame effect fire. Conventional and balance flue options available. Come and see these beautiful and realistic flame effect gas stoves.

An open fire has historically been associated with a warm chimney and, on testing, it can often be shown that 90% of the heat from the fire can be lost to the chimney and the outside air. Woodwarm stoves are safe, single self-contained units which eliminate the waste and put the heat back to the room where it belongs.

All Woodwarm stoves feature an excellent air wash system. After circulating the stove, preheated air flushes down over the double glazed door keeping the glass perfectly clean at all times, even at low temperatures. Superior clean burn efficiency means that not only is more heat achieved on less fuel, but combustion products in the flue are also reduced, causing fewer flue problems. Reduction in pollution combined with more efficiency creates a really environmentally friendly device.

We are also at the exhibition and visitors will be able to discuss the new Kemwell FPL Fireplace Lining Calcium Silicate Board System on stand C31. 

 

Kemwell FPL is a safe, reliable and robust chimney breast lining system, specifically designed for stoves and cassette and inset fireplaces. The system can resist continuous high temperatures up to 1000°C and the board will remain dimensionally stable during and after heating.

To ensure householder safety, compliance with the required HETAS standards is vital, both in terms of product selection and correct installation. All components of a fireplace lining system should be compatible and fire safe. The Kemwell FPL calcium silicate board system is A1 non-combustible, the highest level of fire performance. Kemwell boards are easy to handle, transport and install.

Kemwell FPL is designed to meet Building Regulations Part J (Combustion Appliances and Fuel Storage Systems), providing homeowners, architects, developers, and contractors with adaptability and performance benefits to enable safe and innovative designs in the home.

Kemwell Fire International is a specialist passive fire protection company focused on the protection of life, buildings, and the surrounding environment by meeting the relevant regulatory standard and making life simple for specifiers and installers, as well as providing peace of mind to householders and businesses.

More on Kemwell FPL Fireplace Lining Calcium Silicate Board.

More information can be found on the exhibition at www.hearthandhome.co.uk